Bar/Space margin of error

Enter the largest percent of error that is acceptable in the bar code.

NOTE: When the specified bar code density The number of data characters that can be represented in a linear unit of measure. Bar code density is often expressed in characters per inch (CPI), measure of the narrow bar, etc. results in partial dots in bars or spaces, the dots are rounded to the nearest dot. Rounding introduces a certain amount of error. When the specified density is very high, the amount of error may cause a bar code to become unreadable.

Minimum readable resolution

Enter the minimum readable resolution in millimeters required by the bar code reader.

NOTE: If a bar code is generated with a resolution below the specified value, A high resolution bar code error appears.

Modify bar code data to fit symbology

Check to produce bar codes without checking  for data/symbology Bar codes have many different “structures” (called symbologies). A symbology is defined by the width of the bars, the spacing between bars, and the patterns that represents different alpha and numeric characters. compatibility.

Uncheck to receive an Invalid Data error message if data is not compatible with the selected symbology.

Ignore MSI/Plessey length requirements

Check to produce MSI/Plessey bar codes without checking for the recommended length.
Uncheck to be alerted when MSI/Plessey bar codes are longer than the recommended length.

NOTE: The MSI/Plessey specification recommends that the bar code encode between three and 16 characters, including check digits.

Display recommended bar code quiet zones

Check to display a red rectangle at each end of the bar code to represent the quiet zone Spaces preceding the start character of a bar code symbol and following the stop character. Sometimes called the “Clear Area.”.

Uncheck and the bar code quiet zone does not display.

NOTE: A readable bar code must have blank space before and after the bar code. The amount of space required depends on the density of the bar code. The lower the density, the more space that is required.

Print empty bar codes

Check to print bar codes without data.

Uncheck and bar codes without data will not print. These bar codes also won't generate an error.

NOTE: This option is useful if you'd like to print bar codes on some labels and none on others.